8400JFThe 8400JF 2 hp floating aerating fountain is great for larger ponds or when multiple large patterns are desired. It comes standard with 5 interchangeable nozzles and can be operated without a nozzle to give you 6 FOUNTAIN PATTERNS FOR THE PRICE OF ONE! The 6 fountain patterns range from 22' in height to over 40' in diameter. With 6 multiple fountain patterns, you have the freedom to adjust the aerating fountain to fit your pond, weather conditions, and your tastes. The 8400JF is precision-engineered to maximize oxygen flow and provide maximum benefit to your pond or lake.The 8400JF is supplied with a state-of-the-art GFCB protected control panel, model C-85. The panel includes a 240 volt control panel with timer, GFCB protection, 120V GFI protected outlet for lights, and photocell for light operation. Kasco recommends a licensed electrician to install the C-85 control panel and the 8400JF if you plan to hard-wire the unit into the C-85 control panel.
Important InformationFeatures and Benefits of the 8400JFMultiple Patterns in One Unit: Custom-configure the unit to the exact project needs and your personal tastes. Efficient / Low Power Use: Highest efficiency design for low power consumption versus competing units. Reduces operating costs over the entire life of the unit. 10 running amps on a 240V circuit for low operating costs. Clog Resistant: Unique water-deflecting nozzle design gives you the most clog-resistant model on the market. Successful shallow water operation in as little as 20" Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal and external lip seal for protection against leaks. Seals are silicone carbide for long life. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation. Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode. Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded. Fully Tested: ETL listed to stringent UL and CSA Safety Standards. Dependable: Backed by a two-year warranty Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50', 100', 150', 200', or 250' Includes three 50' braided nylon mooring ropes. Made in the U.S.A.