3400VFX & 3400HVFXNow with Larger Display Pattern and Redesigned Float!The 3400VFX, 3/4 hp floating aerating fountain is great for small to medium sized ponds and has been a best-seller for Kasco for many years. The classic Kasco "V" fountain pattern is a larger 6' tall x 21' wide giving this model a beautiful aesthetically pleasing display. It is designed for maximum oxygenation to improve the health of your pond or lake efficiently. The 3400VFX floating aerating fountains are available in 120V or 240V, 60Hz models as well as 240V, 50Hz international model.The 3400VFX, 120 volt model includes a GFCI protected control box. The C-25, 120V control with timer, GFCI protection, and photo eye for light operation comes standard. The photo eye allows you to set your timer for the hours of operation and when it is dark the lights will activate. No electrician is required to install the C-25 Control or the 3400VFX if an existing 120V, 15 amp receptacle is available.The 3400HVFX (240 volt model) is supplied with a state-of-the-art GFCB protected control panel, model C-85. The panel includes a 240 volt control panel with timer, GFCB protection, 120V GFI protected outlet for lights, and photocell for light operation. Kasco recommends a licensed electrician to install the control panel and the 3400HVFX if you plan to hard-wire the unit into the C-85 control panel.
Important InformationFeatures and Benefits of the 2400VFXImpressive pattern: 6' Tall x 21' Wide Efficent / Low Power Use: Highest efficiency design for low power consumption versus competing units. Reduces operating costs over the entire life of the unit. 7.3 running amps on 120V and 3.7 running amps on 240V circuits for low operating costs Clog Resistant: Unique water-deflecting nozzle design gives you the most clog-resistant model on the market. Successful shallow water operation in as little as 17.5" Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal and external lip seal for protection against leaks. Seals are silicone carbide for long life. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation. Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition. Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded. Fully Tested: ETL listed to stringent UL and CSA Safety standards. Dependable: Backed by a two-year warranty Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50', 100', 150', or 200' Includes two 50' braided nylon mooring ropes. Made in the U.S.A.