4400VFX & 4400HVFX: 1 hp Floating, Aerating FountainNow with Larger Display Pattern and Redesigned Float!Kasco Marine's 4400VFX 1 hp floating aerating fountain is ideal for medium to large ponds.The classic Kasco "V" fountain pattern, now a larger 8' tall x 26' wide, creates an inspiring aesthetic display. The 4-Blade Prop reduces slippage past the prop blades giving the 4400VFX the highest water flow per kilowatts of power used of any unit in the Kasco line. It excels at adding oxygen and improving your pond or lake aeration.The 4400VFX is available in 120V or 240V, 60Hz models. The 4400VFX includes a GFCI protected control box. The C-25, 120V control with timer, GFCI protection, and photo eye for light operation comes standard. The photo eye allows you to set your timer for the hours of operation and when it is dark the lights will activate. No electrician is required to install the C-25 Control or the 4400VFX if an existing 120V, 15 amp receptacle is available.The 4400HVFX is supplied with a state-of-the-art GFCB protected control panel, model C-85. The panel includes a 240 volt control panel with timer, GFCB protection, 120V GFI protected outlet for lights, and photocell for light operation. Kasco recommends a licensed electrician to install the C-85 control panel and the 4400HVFX if you plan to hard-wire the unit into the C-85 control panel.The 4400VFX boasts an innovative float design with a low profile in the water for enhanced appearance, plus an attractive decorative shape.
Important InformationFeatures and Benefits of the 4400VFXDramatic V Pattern: now a larger 8' tall x 26' wide for an eye-catching display Efficient / Low Power Use: Highest efficiency design for low power consumption versus competing units. Reduces operating costs over the entire life of the unit. 11.3 running amps on 120V and 5.7 running amps on 240V circuits for low operating costs Clog Resistant: Unique water-deflecting nozzle design gives you the most clog-resistant model on the market. Successful shallow water operation in as little as 19" Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal and external lip seal for protection against leaks. Seals are silicone carbide for long life. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation. Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode. Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded. Fully Tested: ETL listed to stringent UL and CSA Safety standards. Dependable: Backed by a two-year warranty Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50', 100', 150', or 200' Includes two 50' braided nylon mooring ropes. Made in the U.S.A.