5.1 JF: 5 HP Floating, Aerating Fountain, or Decorative Fountain AeratorKasco Marine's NEW 5.1JF, 5 hp Floating Aerating Fountain or Decorative Fountain Aerator is great for larger ponds or when multiple large patterns are desired. The Kasco 5.1JF Floating Aerating Fountain is unique for its size, in that, it comes standard with 6 interchangeable nozzles and can be operated without a nozzle to give you 7 FOUNTAIN PATTERNS FOR THE PRICE OF ONE! The 7 fountain patterns range from 26' in height to 50' in diameter. With 7 multiple fountain patterns, you have the freedom to adjust the aerating fountain to fit your pond, weather conditions, and your tastes. Kasco's 5.1JF Floating Aerating Fountain does a great job at adding oxygen and improving your pond or lake aeration. The 5.1JF Floating Aerating Fountain is available in a 240V, 60Hz model. The 5.1JF, 240V Floating Aerating Fountain also includes a GFCB protected control panel. The C-95, 240V Control Panel with Timer, GFCB protection, 120V GFI Protected Outlet for Lights, and Photo Eye for light operation comes standard with the 5.1JF Floating Aerating Fountain. Kasco recommends a licensed electrician to install the C-95 Control Panel and the wiring on the 5.1JF to hard-wire the Floating Aerating Fountain into the C-95 Control Panel.
Important InformationFeatures and Benefits of the 8400JFMultiple Patterns in One Unit: Custom-configure the unit to the exact project needs and your personal tastes. Efficent / Low Power Use: Highest efficiency design for low power consumption versus competing units. Reduces operating costs over the entire life of the unit. 20 running amps on a 240V circuit for low operating costs. Clog Resistant: Unique water-deflecting nozzle design gives you the most clog-resistant model on the market. Successful shallow water operation in as little as 26". Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal and external lip seal for protection against leaks. Seals are silicone carbide for long life. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation. Corrosion Resistant: Superior dependability in salt-water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode. Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded. Fully Tested: ETL listed to stringent UL and CSA Safety Standards.Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50', 100', 150', 200', or 250' Includes three 50' braided nylon mooring ropes. Made in the U.S.A.