Use the Brightwell Aquatics Phosphatr - Regenerable Phosphate-Adsorption Resin from Pet Store
in your marine aquaria today. This will help you remove phosphate in your tank in an easy way. Using this product can also eliminate silicates. This is more effective to use than grainy ferric products. It will not have negative effects on your tank when used. It will not change the mineral balance of your water. This makes it safe for your fish, corals, and other invertebrates. Unlike ferric media, this will not split up or shatter when exhausted. The phosphate will remain in it.
This resin is made of durable, artificial polymer beads. This provides smooth flow to efficiently strain out impurities. The Brightwell Aquatics Phosphatr - Regenerable Phosphate-Adsorption Resin is a smart choice to buy. It works great on fluiduzed-bed and canister filtration. It can also be used in passive filtration. This is convenient to use because it is reusable. You can use it five times with the same efficient performance.
You will have no hassles with it because it is easy to use. It comes with a complete set of instructions for proper use. You can get this phosphate remover at a very reasonable price. Make your saltwater tank
healthy and phosphate free with this reliable resin. Grab one now.
- Next-generation regenerable phosphate adsorption resin effective in marine aquaria; will also remove silicates.
- Far more effective than activated alumina and granular ferric products.
- Will not negatively impact water quality nor release phosphate or silicate once exhausted; will not break up or disintegrate like ferric medias, and contains no aluminum to dissolve in aquaria and harm inhabitants.
- Synthetic polymer resin beads provide for durability and excellent flow characteristics; may be employed in fluiduzed-bed, canister, or passive filtration.
- Regenerable up to five times, dramatically increasing cost effectiveness.
Instructions and Guidelines
Basic : Prior to first use, rinse resin under a stream of purified water. For initial application on aquarium, use 1 ml of PhosphatR per 1 US-gallon of water in system and monitor phosphate concentration during usage. Subsequent application of resin may be at the rate of 2 ml per 1 US-gallon.
Advanced: Prior to first use, rinse resin under a stream of purified water. To a point, effectiveness of resin is directly related to the reaction time it has with aquarium water; the longer the reaction time, the more effectively it will remove phosphate and silicate. Once phosphate concentration (”[PO43-]”) has not changed for a period of 4 - 6 hours, remove and regenerate resin, then reapply if necessary. In all cases, the use of a mechanical pre-filter to remove particulate organic material from water prior to its interaction with this media will prolong effectiveness. Fluidized-bed filtration (recommended): follow instructions of filter manufacturer for optimal volume of media to use in reaction chamber; start at a low flow rate and adjust to keep media in a steady “boil” within lower 2/3 of chamber; flow rate should not be such that resin is ejected into aquarium. Canister filtration: Load resin into filter cartridge as directed by filter manufacturer; leave resin in place until [PO43-] reaches desired level or remains unchanged, as directed above. Slowing the flow of water through the filter may be required to obtain maximum effectiveness of resin. Passive filtration: Place resin loosely in a 150µm mesh filter bag and locate in an area of low- to medium-flow. Turning bag over once during usage will serve to shift the resin beads and increases effectivness of this method.
Regenerate PhosphatR with Brightwell Aquatics RegeneratPHOR
Caution: Keep out of reach of children. Not for human consumption.
Note: Resin sold moist. Keep closed to prevent drying. Weight varies due to moisture content, therefore product is sold by volume rather than weight.