Specifications - Flow: 3,500 – 7,500 GPH (13,000-28,000 LPH)
- Wattage: 10 – 60 watts
- Maximum Tank Thickness: 1" (range 3/8" – 1")
- 26mm (range 9.5mm – 26mm)
- Appropriate Tank Size Range: 120 to 1000+ gallons (450 to 3,800+ Liters)
- Dimensions: Wet Side- 4" diameter by 3” long. (102mm diameter by 76mm long.)
- Dry Side – 4" diameter by 2.8" long. (102mm diameter by 71mm long.)
- Clearance Needed Behind Aquarium: 3.3" (84mm)
Operational ModesConstant Speed Mode - Pump runs continuously at a constant speed which can be set by the user.
EcoSmart Nutrient Transport Mode (NTM) - A two phase program to promote maximum health and nutrient export, as well as increased growth for corals. Alternates between a resonant standing wave and a surge effect to stir up and export nutrients.
EcoSmart Tidal Swell Mode (TSM) - Creates a harmonic balance in your aquarium reminiscent of the changing flow conditions that would be found in nature. Flow varies from left to right, right to left, calm, and ends with a great surge.
Reef Crest Random Mode - Reef Crest Random Mode simulates the high-energy conditions of a natural reef crest environment.
Lagoonal Random Mode - Simulates the gentler reef zone found in a natural lagoon.
Short Pulse Mode - Allows for wave pulse timings between 0.3 and two seconds, enabling the creation of FAST alternating flow throughout the tank. Use this mode to create a resonant standing wave.
Long Pulse Mode - Allows for wave pulse timings of between two seconds and 60 seconds, enabling the creation of slow alternating flow throughout the tank.
Feed Mode - Slows down pump to allow user to feed aquarium. User can select the duration and speed for Feed Mode.
Night Mode - Automatically reduce speed and operates continuously at that speed for a period of time during the night. User can select the duration and speed for Night Mode.
Battery Backup Mode - When used with our battery backup accessory, the VorTech pump will switch to Battery Backup Mode in the event of a power outage and will operate at a user set speed. The LED’s on your EcoSmart driver will count down to indicate how much power is available within the battery.
Auto-Dim - LED’s are turned off and display knob dimmed significantly, but pump functions in its current mode. User can program how long after use before the driver enters Auto-Dim.
On/Off Switch - Tap the on/off switch to turn off and turn on a pump. Hold this button to turn off all pumps in a master/slave group. Tap any pump in the groups’ on/off switch and that pump will turn back on.
