Ecotech Marine VorTech MP10 Propeller Pump w/ Wireless EcoSMART Driver
Designed especially for nano-reef aquariums, the MP10 from EcoTech Marine is a small yet powerful pump. The MP10 is ideal for tanks from 2.5 to 50 gallons tanks. Creates gentle flows of 200 to 1,575 gallons per hour, helping the tanks feel more like the ocean.
The MP10 shares the same award-winning technology as the MP40w and lets you take full control of the flow. With all the electrical components outside the aquarium and a variety of easy-to-program modes, the VorTech is the safest, most versatile pump on the market.Specifications:
Flow: 200 to 1575 gphEcotech Marine VorTech EcoSMART
Wattage: 8 to 18 watts
Maximum Tank Thickness: 3/8"
Appropriate Tank Size Range: 2.5 to 50 gallons
Dimensions: Wet Side- 2.5" diameter by 1.5" long, Dry Side - 2.5" diameter by 2" long
Clearance Needed Behind Aquarium: 2.25"
- Improved Wireless Range
- On/Off Button
- Wave Auto-Tune Mode
- EcoSmart Nutrient Transport Mode
- EcoSmart Tidal Swell Mode
- Dark Mode
- New and Improved Night Mode, Feed Mode, Battery Backup Power Meter
- The Classic Reef Crest, Lagoonal, Short Pulse and Long Pulse Modes are still included
- A new more water resistant driver case
A description of the modes can be found here:EcoSmart Tidal Swell Mode
In this EcoSMART mode water is circulated to create a harmonic balance in your aquarium reminiscent of the changing flow conditions that would be found in nature. Over the course of several hours, the flow pattern will go from very chaotic with an emphasis on left to right flow direction to an emphasis on right to left flow direction, all the while experiencing calm period in between and followed by a great surge of flow at the very end of the cycle. Adjusting the dial changes the maximum speed achieved at any time during this mode. Slave pumps should be positioned opposite the master and on the back of the tank to take full advantage of the EcoSMART modes.EcoSmart Nutrient Transport Mode
In this EcoSMART mode, water is circulated in a two phase program consisting of wave motion to stir up detritus and surging motion to move the detritus into your overflow where it can be skimmed out. This effect promotes maximum health and nutrient export, as well as increased growth for sensitive corals such as SPS. Adjusting the dial changes the maximum speed achieved at any time during this mode. Slave pumps should be positioned opposite the master and on the back of the tank to take full advantage of the EcoSMART modes.Classic Reef-Crest and Lagoonal Random Modes
In random mode you can toggle between two different modes, Reef-Crest and Lagoonal. When a pump is in Lagoonal Random Mode, the dial is used to set the maximum operational speed, and the driver will automatically randomize the pumps output to simulate either a high (Reef-Crest) or low (Lagoonal) energy reef environment. If this pump is a master, the associated slave pumps will replicate the master in sync or anti-sync modes.EcoSMART Driver General Operational Modes