Comments: Looks great, sturdy.

Comments: sorry my english is little. but in try to write. is very nice stand, and beautiful.
<br />thanks you soo much.

Comments: The laminate was peeling in areas. there was white foam from the packing stuck to the boards. The poles that screw in have a piece of wood and plastic that will push in and out of reach with your fingers. It took deforming an old hanger and a pair of pliers to retrieve. The package I got did not include the hinge covers - you don't NEED them, but it says you are supposed to have them. And the worst of it was, the directions are in the most illogical order. I recommend perusing the directions, and doing the project in a more logical order. Do not put the top on until you have screwed the poles into the bottom piece first. The perfectly matching stand in theory is nice, but you are better off spending the same amount of money on a side table with an attractive would finish.

Comments: Well, the packaging was a little askew and when I opened the box, the smaller internal box which contained the hardware (screws, etc..) was smashed and opened. The screws were all over the box, which I was worried some may have fallen out. But all hard ware made it.
<br />On to the Assembly: Upon assembling the stand the overall look is great. I like the look of the stand, it matched the coloring of the tank. The things I did not like were the screws you had to screw in through the top down into the unit. If you don't sink the screws correctly, then you run the risk of it touching the bottom of the tank, which could be bad news. The metal poles were not cut to the correct length, so there is an air gap between the face of the pole and the adjacent surface. No big deal, it can't be seen, it's facing towards the bottom of the stand.
<br />
<br />Overall, worth the money I paid for it and assembly was pretty simple. It took approx 20 minutes to fully assemble. I would buy another one if I had an additional tanks..

Comments: It looks really nice with out furniture and goes great with the tank.

Comments: does the trick! thats all i ask... could have been a bit taller.

Comments: easy to assemble and has a nice look about it. obviously this is made for the JBJ 24 Gallon Nano Cube Aquarium so the fit is perfect. the cabinet holds the light ballast and other supplies. a small self is included. very sturdy. my only recommendation for assembly would be to make sure the top is loosened a bit before placing the stainless steel columns. to be honest i could not figure out how to put the base coasters on with the screws supplied...but they are really not needed. in my opinion best if placed on on non carpeted areas but sure that would work also.

Comments: Nice item, with sharp,clean look. Looks awesome with the tank....recommended!

Comments: This is a very solid and attractive stand. It has good functionality and fits perfectly with the 12G Cube I have. The only strange part about this stand is the instructions so you have to put it together with a different hardware list, meaning if you are somewhat handy you will have no problem putting it together but others it may take them a little while to figure this part out.