1-888-9-WEBPETS
(1-888-993-2738)
Certified Seal
Dogs Cats Fish Birds Reptiles Small Pets Pond
Kent Marine Float Valve Kit For RO and RO/DI Units
Click to Image Zoom

Kent Marine Float Valve Kit For RO and RO/DI Units

In stock: Order by 2PM EDT for same-day shipping (M-F only)

Item #: KM1651

MSRP: $63.59 Save: $6.60 (10%)
$56.99
Add to Wishlist

Quick Overview

Are you tired of manually removing and refilling water in your aquarium? This can be a pain staking activity especially when you are busy and don’t have time at all. Well, you don’t have to worry because there is a product that wi...
Product Description
Reviews

Kent Marine Float Valve Kit For RO and RO/DI Units Information

Product Manuals & Documentation

Are you tired of manually removing and refilling water in your aquarium? This can be a pain staking activity especially when you are busy and dont have time at all. Well, you dont have to worry because there is a product that will automatically refill and remove water from your fish tank!

Introducing the Kent Marine Float Valve Kit from Pet Store! This product fills your water tank up to your desired level and once it does it, it automatically shuts off preventing water spillage and waste. The wonderful thing about this product is it works mainly on pressure and not on electricity. This makes the product efficient and power saving.

The product contains a pressure solenoid float valve that aids water filling through the use of pressure.

The product can be used in all RO types except for dual membrane system units. Take note however that this product cannot be used if a level control mechanism exist in your aquarium.

The Kent Marine Float Valve is clearly an efficient product, without using electricity it can fill up your water tank. Other than that, the product is affordable enough to be bought even by the simplest aquarium owners. So, if you want efficiency and at the same time affordability, then this product is for you!

The FVKITKENT allows an RO to fill a reservoir to a desired level, then shut down water production completely.  This kit works from pressure only, no electricity.  Included within this kit is a pressure solenoid, float valve (part # FVKENT), check valve, a 1/8" elbow, a male 1/8" x 1/8" connector and 1 foot each of blue and orange tubing.

FVKITKENT can be used on all RO`s except dual membrane systems like the 100, 120 and 150 gallon per day and the commercial RO units.

Not compatible with SpectraPure RO and RO/DI systems.

Note: Not recommended for level control in aquariums.

Specifications

  • pressure solenoid
  • float valve (part # FVKENT)
  • check valve 
  • 1/8" elbow 
  • male 1/8" x 1/8" connector 
  • 1 foot each of blue and orange tubing.

Warranty

90 day manufacturer warranty
+ Display More
- Display Less

Kent Marine Float Valve Kit For RO and RO/DI Units Reviews

Average Reviews

Customer Reviews

Kent Float Valve Product Review by JOHN A ROWEDDER (Posted on 2/26/14)
Rating
Excellent!

Comments: Excellent product, does what it's designed to do... turns the outflow water from the RO unit off. Haven't heard any noise from it at all. Great flood saver in case power goes out as in my case, my pump didn't come on to drain my freshwater holding tank into my aquarium so the Kent Float valve just turned the water off for me before it spilled over. Awesome!

Set and forget Product Review by BEN (Posted on 6/18/11)
Rating
Excellent!

Comments: Great product. Once it's installed, your RO will completely shut down once your reservoir is full. I wish I had installed one years ago; it would have saved me an untold number of gallons of water and wasting filter performance for forgetting to turn off the water.

float valve kit Product Review by KERRY (Posted on 4/9/10)
Rating
Excellent!

Comments: unit works great, really saves alot of water. I have it going into a reservoir (5 gallon bucket) in which I have a float inside to stop the flow when the bucket is full and then going into my sump which has another float. Going into the reservoir first keeps the unit from cycling to fast. Also if the power goes out (I'm on a well) then I have about 2 days of reserve in the bucket.

It Works Product Review by SHANE (Posted on 2/11/10)
Rating
Excellent!

Comments: If you are wanting to run your line out from ro/di system to top off your tank or refugium, then all you need is the float valve, don't mess with the other stuff that comes in the kit. I drilled a hole in my refugium where i wanted the float valve to go and applied teflon tape to threads. Inserted float valve through hole, tightened the nut on the other side, took my line from my ro/di filtration system and inserted it in the hole going to the float valve and tightened nut. No leaking either from refugium or from ro/di water coming in to valve. The valve works like a charm, works almost exactly like the float valve in your toilet, as water rises, the float valve rises and the outflow of water to your tank starts to slow down until finally, the float valve reaches the point where it is fully up and shuts the flow of water off coming from your ro/di system. I would agree with others that it would be nice if they sold JUST the float valve seperatly instead of the entire kit which I am sure would bring the price down by at least half, but other than that, works perfectly!

Why didn't I get this sooner?! Product Review by RONALD HATTIE (Posted on 2/1/09)
Rating
Excellent!

Comments: For some reason, I've never had a shutoff mechanism for my RO/DI unit. Being who I am, I have a tendency to forget turning the darn thing off before it overflows my water storage device (aka a plastic garbage can). After one too many "floods", I finally caved and bought this item. Sure enough, it shuts off, and my carpet is spared. If you have an RO unit, and a floor you'd like to keep dry, this is a handy item to have!

Items Similar to Kent Marine Float Valve Kit For RO and RO/DI Units