Maintain the right pH level of your Nano Reef aquarium water by putting in the appropriate concentration reef water elements balanced with a proper buffer system. Use the Kent Marine Nano Reef Parts A & B from
Pet Store to maintain stable pH and alkalinity levels of aquarium water. The combination of these two parts creates a balanced reef water system that is ideal for reef water tanks ranging from 8 to 40 gallons of water.
The Nano Reef Part A has essential major and minor elements as well as trace elements that are found in natural reef waters. These are derived from salts of calcium, iron, magnesium, cobalt, rubidium, potassium, zinc, iron, chromium, manganese, cesium, nickel, and strontium. Together with Kent Marine Nano Reef Part B, it provides these elements in correct doses so that the quality of aquarium water is within the right reef water parameters.
The Nano Reef Part B is a buffer system for Part A, which is ionically-balanced to increase the alkalinity of the aquarium water and keep the pH stable. Part B provides the same alkalinity ratio found in natural reef water. It contains salts of carbonate, bicarbonate, tetraborate, sulfate, bisulfate, and iodide.
The Kent Marine Nano Reef Parts A & B are two liquid part supplements that are easy to use. Best of all they keep your corals, invertebrates and other
reef livestock healthy and vibrant.
Calcium and alkalinity supplements formulated for nano reefs and smaller reef systems. Easy-to-use, 2-part liquid system simplifies reef supplementation vital for healthy coral and invertebrate growth. Provides all important major, minor, and trace elements in proper ratios while increasing alkalinity and maintaining proper pH. Minimizes overdose or adverse chemical reactions. Each 8 oz bottle treats 475 gallons.
NanoReef Part AGeneral InformationNanoReef Part A contains calcium, magnesium, strontium, iron, and many other important elements. When used with NanoReef Part B, it provides all necessary major, minor, and trace ions in proper ratios to maintain proper water parameters in nano reefs and other small reef systems. Free of phosphate and other undesirable substances.
Active IngredientsSalts of calcium, magnesium, potassium, strontium, rubidium, iron, zinc, manganese, nickel, cobalt, cesium, chromium; trace minerals.
Directions for UseNanoReef Part A: Add 1 ml (8 drops) per 4 gallons tank capacity daily to maintain proper water parameters. Add directly to the system in an area of good water movement. Wait 5 minutes, then add Part B. Do not mix with other supplements outside of aquarium. Use NanoReef Part B to maintain alkalinity within a range of 7-10 dKH. Use of accurate test kits with these products is highly recommended and will ensure that the concentrations in the aquarium are within the desired ranges.
NanoReef Part BGeneral InformationNanoReef Part B is an ionically-balanced buffer to NanoReef Part A that increases alkalinity and maintains stable pH. When added at the same dosage as NanoReef Part A, NanoReef Part B provides alkalinity in the same ratio found in natural seawater. It is recommended that accurate test kits be used on a regular basis to ensure water parameters remain consistent within the desired ranges (calcium 420-450 ppm, magnesium 1,300 – 1,350 ppm, strontium 8-10 ppm, alkalinity 7-10 dKH).
Active IngredientsSalts of carbonate, bicarbonate, bisulfate, sulfate, tetraborate and iodide; trace minerals.
Directions for UseNanoReef Part B: Add 1 ml (8 drops) per 4 gallons tank capacity daily to maintain proper water parameters. Add directly to the system in an area of good water movement. Wait 5 minutes after adding Part A. Do not mix with other supplements outside of aquarium. Use of accurate test kits with these products is highly recommended and will ensure that the concentrations in the aquarium are within the desired ranges.
NoteNanoReef Part B may form some sediment. Shake well before use. If crystals form, product may have been stored below 60 degrees F. If this happens, warm product slowly and shake vigorously.
