Kent Marine pH Precise Low Range Controller Information
KENT MARINE PH PRECISE LRC (Low Range Controller) 100G
pH PRECISE Low Range Controller buffers freshwater aquariums at pH 6.0 to provide a very stable pH. It lowers pH to 6.0 in hard or soft water. It softens the water and provides a conditioned acidic environment for sensitive fish. Low Range Controller can be mixed with Neutral Controller to provide any pH between 6.0 and 7.0!
First use Ammonia Detox to remove chloramine. If using Reverse Osmosis water or if tap water is soft (low GH), use Kent R/O Right first to increase total dissolved solids. Use Low Range Controller to adjust pH. Note: If you have very hard water, Low Range Controller can cause cloudiness. If this happens, you can soften the water first with a Reverse Osmosis unit or you may want to use pH STABLE and TRUE pH Plus or Minus instead of this product.
Mixing and addition:
Add 1 level teaspoon of Low Range Controller per 10 gallons of aquarium water until target pH is reached. When making water changes, it is preferable to put the product in the water to be added to the aquarium. If you need a higher pH than 6.0, you can mix Low Range Controller with Neutral Controller in the proportions shown below.
Contains phosphate buffers. If in eyes, immediately flush with water for 15 minutes. If ingested, drink water. Call a poison control center for advice. If on skin, wash off with water. KEEP OUT OF REACH OF CHILDREN!
+ Display More
- Display Less
Works for me
(Posted on 10/22/08)
Comments: Easy to use and works for my tank. Been using this product for almost 10 years.
(Posted on 6/24/08)
Comments: Simple and straightforward to use, easy instructions and it works... hummm this is too easy!!! So very happy with this product!!