Kent Marine Reef Carbon - 1 Quart Information
Part #: 00027
Description: Removes organic pollutants, stains, and entrained toxic gases in marine and freshwater aquariums or ponds. Contains the finest pelletized activated bituminous coal based carbon. Pore size is in the 20 to 2,000 Angstrom range, ideally suited for removal of large organic molecules. Super activated with very high iodine and molasses numbers. Less than .2% ash making it suitable for sensitive species such as discus. Will not leach phosphates or promote undesirable algae growth, suited to sensitive reef systems! Engineered for water flow, will not clog easily like small granular or pelleted carbons. Out performs any carbon especially coconut shell!
Directions: Reef Carbon is dusty. This is a necessary characteristic of the finest carbons and is a small price to pay for a carbon that is so active, low in phosphates, and ash, so rinse well in cold running tap water. This will take some effort. IN THE AQUARIUM: Place in a polyester bag or filter chamber and position for maximum water flow through the carbon. IMPORTANT: You can use as any other carbon, but best results will be obtained by using any carbon for only 3 days per month or so. (This is because any carbon will continue to remove trace elements long after it is totally plugged with organics.) Use only enough to remove the color from the water.
Considerations for use: Reef Carbon is also soft (this is due to pore size and makeup) and could release dust into the system if mechanically stirred too rapidly. Do not place where water will drop a large distance directly onto the product or churn it violently. Because Reef Carbon is so active, you can use considerably less than with other carbons (about 1/4 lb. or 1 cupful per 100 gallons of tank capacity, you may need more or less depending on how dirty the tank is). Reef Carbon will have done its job, so dose the tank with Kent Marine Essential Elements, Discus Essential, Freshwater Essential, or A F Cichlid Rift Lake Trace Elements as appropriate for your type of system to restore trace elements removed by any carbon. CAUTION: Recent products introduced by other manufacturers that contain strong enzymes may dissolve the binder that holds Reef Carbon together. If this happens the carbon can come apart and cause an ugly mess in your tank. Because of this, DO NOT USE ENZYME PRODUCTS WITH Reef Carbon! Simply remove the carbon, use the product, then replace the carbon several days later.
Contents: Bituminous coal based, steam activated, pelletized carbon.
Precautions: Rinse well prior to using.
+ Display More
- Display Less
(Posted on 2/7/14)
Comments: Good product. Does it's job dropped my phosphates:)
(Posted on 8/7/12)
Comments: Great Product you get what you pay for when it comes to carbon.
(Posted on 12/3/09)
Comments: Kent reef carbon has very little dust. The pellets are hard reducing grinding in a reactor. Clears the water well. Overall a great carbon!
(Posted on 8/19/09)
Comments: I picked up some of this while I was fighting some Hair Algae. I liked that it was designed for reefs (no coconut shell) I ran it in a TLF Phosban reactor, and in 24hrs I noticed a big water clarity difference. I now run this all the time, and change it monthly. I like the size of the pellets, won't filter through the reactor.
(Posted on 8/11/09)
Comments: thist product is good for my magnum,Excellent thanks.