*Eheim 1048 pump required and sold separately
Remove all the unwanted nitrates in your aquarium that has been causing harm to your pets using the Korallin Biodenitrator Nitrate Filter S-1502 w/o pump from Pet Store
. It is a nitrate filter without pump, but it has a large internal volume but it produces a small footprint. Even better than that, this filter takes off nitrates fast. It is that efficient because of the high internal recirculation process that it does. Moreover, its lid has a top-loading feature, and it also includes detachable tubes. These make the maintenance easy and very manageable. Also, with this filter, you will not need any feeding liquid as it has an ultra-pure sulfur filling.
With the Koralling Biodenitrator Nitrate Filter S-1502 w/o pump, feeding to the bacteria in the aquarium is not required. You just need to place this unit in your system, and then let it run for about 3 to 4 weeks. It is different from the simple single pass filters commonly used as its recirculation method is more effective as its reactor media buffers the pH level in your aquarium
. Aside from that, it can reduce the nitrates of 100 liters with 50 mg NO3 water to 0% in just 3 to 4 days.
Because of this nitrate filter, you can now say good bye to those unwanted particulates in your aquarium forever.
- Large internal volume with a small footprint
- Optimal efficiency through high internal recirculation and fast Nitrate removal
- Top-loading lid with detachable tubes for easy maintenance
- No feeding liquid required!
- Ultra-pure Sulfur (Sulphur) filling 99.9%
This revolutionary design makes denitrifaction easy and efficient. Feeding to the bacteria is not necessary; just put the unit into your system and let it run for a few weeks, denitrafication power will be activated once the unit is broken in.
The design is based around the C-1502 reactor and combine Sulfur (Sulphur) media with calcareous media to offer a high level of Nitrate removal. The recirculation method is far more efficient than simple single pass filters. As it includes reactor media, the pH is fully buffered and enriched with calcium before being returned to the tank.
With the build quality of the S-1501 reactor and recirculation, these offer very efficient nitrate removal. After a running in time of approximately 3-4 weeks (for the bacteria to colonize the chamber) this unit will, for example, reduce 100 liters with 50mg NO3 to 0 in 3-4 days.
Because this denitrator makes use of the design of Calcium Reactor C1502, once the nitrate problem has been solved, you can easily turn this denitrator into a Calcium Reactor with some additional parts (sold separately).
Comes with 1.6kg high grade pure Sulfur (Sulphur) and crush-coral substrate.
Korallin S-1502 - Rated for up to 250 gal. Reactor height: approx. 15.75"; Diameter: 4.50"; Footprint diameter: 6.30"; Included filter media: 6lbs
More Info:The Use of Sulfur (Sulphur) Denitrators
Over the last few years, Sulfur (Sulphur) denitrators have grown in popularity in Europe from humble beginnings in public aquaria to being used in cutting edge integrated filter systems.Existing Methods
Before we recommend a new process to customers, we make sure we have tested them ourselves on our own systems. We have long held the view that if you design a natural system with the management of nutrients in mind, nitrate and phosphate can be almost forgotten. But with all the best laid plans, you often end up with excess nutrients. These may be due to a higher load of fish or inefficiency in the system’s denitrification abilities. Either way; even the best systems can end up with a nagging 10-20ppm of residue nitrate. The options currently available to resolve excess nitrate would normally take the route of increasing water changes, adding more live rock, or increasing things like the deep sand beds or adding mangroves.
An option that many people have tried is the slow flow denitrator. These rely on anaerobic bacteria, colonising a suitable medium and the flow of water being slow enough, to become depleted of oxygen to create an environment they can thrive in. These bacteria will then multiply and consume the nitrate in the low oxygen water. If well set-up this method can be quite successful.Enter Sulfur (Sulphur) Denitrators
Guy Martin from Ecole Nationale Supérieure de Rennes did the original work on fresh water treatments plants, although the science may pre-date this. The work was transferred to the marine environment and used by Michel Hignette, curator of the MAAO aquarium. A pilot project was launched. Since then the experiment was done on a much bigger scale, at the MAAO, as well as in the Grand Aquarium in Saint-Malo. All of these systems have been a great success and the systems have proved a real boon in large scale aquariums where the management of nitrate is often an after thought, when feeding displays stocked with large fish with voracious appetites. After these successes, there have been many Sulfur (Sulphur) denitrators added to private aquariums across the continent.
- Simple to set-up and manage.
- Needs no additional feeding with carbon based