Keep your aquarium clean and free of harmful micro organisms with Lifegard Aquatics AquaStep Pro UV Sterilizer from Pet Store
. With its hang-on design, you can use it on basically any kinds of reservoir tank or aquarium. Its molded design provides easy installation. Its Internal Step feature ensures triple contact time by directing the water across the UV sterilizer multiple times.
Compared to other UV Sterilizers, the Lifegard Aquatics AquaStep Pro has higher capacity despite its similarity in height. This is mainly because of its different chamber shape, which is designed to create more area for greater contact time.
You won`t find anything as versatile as the Lifegard Aquatics AquaStep Pro. It has both outlet and inlet on top which allows you to use it as a hang-on sterilizer or installed beneath the tank
. And with its adjustable clamp and tuning screws, you are guaranteed a snug and secured fit anytime, no matter how you install it.
And the most important thing is, it uses the highest quality UV bulb in the market, which is made with hard quartz, allowing you maximum UV light transmission. Plus, you are guaranteed maximum output, thanks to its end cap wiring design.
Take the next step in UV sterilizing with Lifegard Aquatics AquaStep Pro UV Sterilizer.
Step Up to a New Lifegard Technology!
AquaStep Ultraviolet Sterilizer
For use in the following applications: Installed in a hanging position or underneath aquarium tanks to kill disease causing micro-organisms. Also use inside pond filters or skimmers to kill free floating algae.
- Internal Step Design. Directs water back and forth across UV light tripling the contact time through the unit.
- Ease of Replacement. Unique 4 pin connector for easy bulb replacement without shutting down the system.
- Clear View Port. Allows visible light (no UV) to pass through and indicated bulb is operating.
- Adjustable Clamp. Spring loaded clamp creates a snug fit to any aquarium or reservoir tank.
- UV Bulb. Highest quality, pure hard quartz material allows maximum UV transmission and longer bulb life.
- Compression Coupling and Gasket. Creates water tight seal at quartz sleeve and around ballast cord.
- Electronic Ballast. 10W, 15W and 25W high output UL listed ballast.
- Versatile. Inlet and outlet at top for hang on and at bottom for below aquarium installations. Use inlet ports on each side to connect multiple units together for any size requirement.
- Distribution Plate. Evenly distributes water into chamber.
- Plugs. Plug off inlet ports not in use. Can be removed to drain or clean unit.
- Free Standing Base. Holds AquaStep in place for installations below or beside aquarium.
- Design. Innovative design creates more volume area for increased contact time. Flat side allows snug fit to any aquarium or reservoir tank.
- High Capacity. More capacity than any other make of equal height due to shape of chamber and step design.
- Water Fall. Increases oxygen level by spreading out a thin sheet of gently falling water.
- Adjustment Screws. Keeps unit level when installed in hanging position on tank.
- Injection Molded Construction. Heavy duty thick wall ABS injection molded parts. Built to last.
- Inlet: 1 1/4" Slip or 3/4" FPT
- Outlet: 1 1/4" Slip or 3/4" FPT
- Dimensions: 7.5"W x 3"L x 23"H
- Flow Rate: Up to 760 GPH
- UV Wattage: 25W