With the Salifert Strontium Test Kit from Pet Store
, it is now easy for you to find out the chemical components of your aquarium water
. This is an affordable, do-it-yourself set that will make it easier for you to examine the elements that are present in the water that you've been using. This works efficiently, regardless if you supply your aquatic inhabitants with fresh or saltwater.
The Salifert Strontium Test Kit, as its name implies, measures the water for the presence of Strontium, as well as the other substances that could be helpful for the growth of your fish and those that could be fatal to its life. Strontium is a type of element that your water should be present with to ensure that your friends can propagate and mature effectively.
The Salifert Strontium Test Kit also provides you with the name and the level of harmful substances like ammonia, nitrate, and chlorine. The product comes with a guide that tells you the appropriate levels of substances that your aquarium should have. It is a quick and easy way to tell if you're doing well in maintaining your tank. This kit will also last for, at most, forty uses.
Figure out how to improve the quality of your pets' living conditions with the Salifert Strontium Test Kit.
|Salifert Strontium Profi-Test |
- In a marine aquarium strontium plays an important role in accelerating the growth of coral and calcareous algae and natural sea water contains approx. 7 - 9 mg/L strontium.
- Strontium is very difficult to test for, but if there is found to be a depletion of calcium in the aquarium then strontium levels are likely to be very low as well.
- It is advisable to maintain a strontium concentration of between 5 and 20 mg/L.
- Salifert was the first to introduce a strontium test kit and this test measures both ionically free and moderately complex strontium in increments of 5 mg/L.
- Sufficient for up to 40 tests.
- For marine use only.
Reagent Sr-1 is caustic. In case of contact with eyes rinse immediately with plenty of water and contact a physician immediately. In case of ingestion do not induce vomiting but contact a physician immediately. In case of contact with skin wash with plenty of water. Keep out of reach of children.
1. Fill test vial with 5ml of water (use 5ml syringe).
2. Add 12 drops Sr-1 (caution caustic) and swirl gently for 10 seconds.
3. Add 1 level scoop of Sr-2 and swirl gently for 5 seconds. The color should be red/pink.
4. Fit the 1ml syringe without the yellow label with the small plastic tip. Ensure that the tip is mounted firmly. Fill this syringe with 1ml of Sr-3 (lower end of black rubber ring at 1.00ml mark). Dose this amount in the test vial and swirl gently for 20 seconds. If the color has changed to blue and remains so even after an additional 30 seconds then the calcium concentration is far too low (approx. 300mg/l or less) and should be corrected first before doing strontium testing.
5. Again fill this syringe with 1ml of Sr-3. Add this drop wise to the test vial. Swirl gently for a few seconds after each drop until the color changes to blue. If the color has changed to blue then swirl gently for 15 seconds. It is very likely that the color will revert back and will not be pure blue. In that case add one more drop of Sr-3 and swirl again for 15 seconds. Repeat this until the color remains blue.
6. Hold the syringe with the plastic tip facing upward. Read the value at the upper part of the black rubber ring. Look for this value in the calcium table to get the calcium concentration.
7. Fill the 1ml syringe with the yellow label (no plastic tip needed and is not supplied) with 0.5ml Sr-4 (lower end of black rubber ring at 0.50ml mark). Add this to the test vial and swirl gently for 10 seconds. The color will now be red/pink.
8. Add two levels scoops of Sr-5 and swirl gently until this powder has dissolved. Let it stand for 12-15 minutes (use a clock).
9. Fill the 1ml syringe without the yellow label and fitted with the plastic tip with 1ml of Sr-3 . Add this drop wise to the test vial. Swirl gently for 20 seconds (should definitely not be less that 20 seconds) after each drop until the color changes to blue.
10. Hold the syringe with the syringe with the plastic tip facing upward. Read the value at the upper part of the black rubber ring. Look for this value in the strontium table to obtain the strontium concentration.
|Reading from Step 5||Calcium mg/l|
+ Display More
- Display Less
Great Test system
(Posted on 2/26/14)
Comments: It checks for both calcium and strontium levels. Very accurate.
The only drawback to this test kit is, if your calcium level is to high then you can't get a strontium reading.
I'd still recommend it to any aquarist looking for a high quality test kit.
Love This Test!!
(Posted on 4/7/13)
Comments: After wondering if the Strontium levels were correct for my 144 coral reef tank, problem solved! This test is easy to use and accurate. I do not have any other results to compare the strontium but I did for the calcium. Be mindful of a couple of typos in the directions; referring to the same syringe with a red label in one place and a yellow band in another as well as "end" instead of and in the calcium portion of the test (which by the way, is awesome and very accurate).
(Posted on 5/19/09)
Comments: i used instant ocean test kits for about 15 years with my saltwater fish only tanks and they are very good test kits better then any drip drop test tube kits!! that is until i went reef and tried these salifert kits because of all the good things i heard over the years. wow... this is it! the way to go! they are more expensive ...BUT i get more tests...so it adds up. get um!
Best Kits Available
(Posted on 2/14/08)
Comments: Even though it's expensive and only gives 25 tests, this is the best Strontium kit out there, by far! This kit also includes the Calcium test, as this is the first portion of the test. Salifert doesn't play this up. I think that's just so they can still sell Calcium kits. To me, the Strontium test portion of it is just a bonus. You won't find an easier or more accurate Strontium kit out there.
Salifert strontium test kit
(Posted on 10/11/11)
Comments: This test is not very accurate as it titrates only between 1.00 and 0.90 ml. Maybe it's just tough to get a good commercial strontium test. I used this kit more to determine whether my strontium was about 10 or 0 mg/L?